Carbon nanotubes are novel carbon-based materials made up of “tubes” of graphene sheets. They have a range of fascinating properties that have made them the focal point of a huge amount of research. In particular, bioconjugates of carbon nanotubes are of interest because of their useful biomedical applications.
Methods for the bioconjugation of carbon nanotubes commonly include aldehyde bioconjugation, amine-based techniques, cysteine bioconjugation, and conjugates that utilize tyrosine residues.
Carbon nanotubes, sometimes shortened to CNTs, are fascinating chemical molecules that were discovered in 1993. CNTs are made up of “tubes” of carbon which are effectively rolled-up sheets of single-layer carbon atoms. Their basic unit is made up of graphene, a simple single layer of carbon atoms arranged in a honeycomb lattice. Just like graphene, CNTs have very strong carbon-carbon bonds because of their sp2 hybridization.
Carbon nanotubes are made up of sheets of carbon atoms in a hexagonal arrangement that are rolled up into cylindrical tubes. They can be single-walled (SWCNT) or multiwalled (MWCNT).
CNTs can be formed of single-walled carbon nanotubes (SWCNTs) which have a diameter of less than 1 nm or multi-walled carbon nanotubes (MWCNTs) which contain many linked structures with much larger diameters of over 100 nm.
Graphene oxide (GO) is another important and popular derivative of graphene sheets. Consider our article detailing a study with GO involving epoxide bioconjugation; or our article detailing an application of GO in bioconjugation of quantum dots.
The benefits of carbon nanotubes include variable electrical conductivity, high mechanical strength, lightweight, high stability, and more which allows them to be used in a range of applications such as electronics, sensors, batteries, light sources, and even for drug delivery.
Just like their building block graphene, CNTs have many fascinating properties that have made them a target for research into potential applications over the last three decades. The most interesting of these properties is their conductivity. CNTs can be conducting, semiconducting, or non-conducting depending on their structure. Beyond that, they have high mechanical strength, are very lightweight, have high thermal conductivity, and are highly stable.
Thanks to this incredible combination of properties, CNTs are excellent candidates for being used in electronic devices, sensors (chemical, electrochemical, and biological), batteries, field emitters, light sources, hydrogen storage, and more. There is even significant research into their potential applications for drug delivery, with new and efficient systems based on CNT nanomaterials.
Bioconjugate chemistry is the study of linking molecules to biomolecules. This could mean linking one biomolecule to another or linking a biomolecule to a non-biological molecule such as a simple organic molecule, a metal, a particle, or a surface (learn more about conjugation methods for surfaces and bioconjugation of metal complexes in our related articles). The study of bioconjugation is a huge field and includes a range of biomolecules, applications, and possibilities.
Nano bioconjugates of carbon nanotubes include two molecules attached together: a carbon nanotube structure and some other biomolecule like a protein or carbohydrate.
Bioconjugated CNTs have received a lot of attention in recent years, particularly for their biomedical applications. The potential applications of bioconjugated CNTs include biosensors, drug delivery systems, and biological/medical imaging.
Related articles:
Most proteins and antibodies have readily available amines and carboxyls. You can label proteins and antibodies with these conjugation kits to save time and improve consistency between experiments.
The functionalization of CNTs has been studied in detail in the last three decades, but even now the majority of popular methods produce samples with mixtures of various diameters and chiralities of the nanotubes. To overcome that, successful methods often use post-synthesis processing to capture the desired CNT size and chirality.
Carbon nanotubes can be functionalized using covalent functionalization or non-covalent functionalization. One example of covalent conjugation of carbon nanotubes involves creating amino-CNTs from fluorinated CNTs and then attaching them to the carboxyl group of a protein.
CNTs can be functionalized by the covalent bonding of functional groups onto the carbon of CNTs. This can be performed at the end caps of the nanotubes or on the side walls depending on the desired functionality. However, sidewall functionalization changes the hybridization of the carbon bonds from sp2 to sp3 which changes the conjugation structure of the carbon layer.
Fluorinated CNTs have been one of the most popular methods of CNT functionalization since the discovery of CNTs. Fluorinated compounds are often highly reactive and are strong enough to react with the highly stable sp2 carbon-carbon bonds in the CNT structure. Furthermore, fluorinated CNTs have weaker C-F bonds than expected in a typical alkyl fluoride which makes them more ideal for replacement with other functional groups such as amino, alkyl, and hydroxyl groups which can then be used for bioconjugation reactions.
Once functionalized, PEGylation of carbon nanotubes can enable them to go undetected by the immune system and circulate longer. Learn more about this in our article.
The authors of this paper managed to produce amino-functionalized SWCNTs from fluorinated CNTS. They expected them to be potential synthetic precursors to bind amino acids, DNA, or even polymers to sidewalls of SWCNTs. To see how these amino-CNTs can be used to create a bioconjugate, see the section on “Amine Bioconjugation with Carbon Nanotubes” in the article!
The authors suspended a small quantity of the CNTs (10-20 mg) in 5 mL of a terminal alkylidene diamine and sonicated it for 3 minutes.
The authors then added 5 drops of pyridine to act as a catalyst to start the reaction.
The reaction must be performed under nitrogen to ensure you don’t form any unwanted side products.
The authors used a 0.2 um pore size Teflon membrane to collect the amino CNT and washed it with large amounts of ethanol.
Once dried overnight, you’ve successfully made your amino-functionalized carbon nanotubes.
Learn more about DNA conjugation techniques in this article to determine how CNTs can be coupled with DNA.
Non-covalently functionalized CNTs have the great advantage of not destroying the conjugated system of the CNTs sidewalls which means you can maintain your desired functional properties. However, the downside to non-covalent methods is that they are less stable. CNTs can be wrapped with polymers or surfactants using non-covalent interactions, and aromatic small molecules can be absorbed onto the surface walls of the CNT by π–π stacking interactions.
The authors of this paper used a sodium dodecylbenzene sulfonate surfactant to successfully solubilize high weight SWCNTs in water. SWCNTs of high weight, unfortunately, have strong interactions and like to aggregate in water. This makes them difficult to suspend in water which is essential for making further modifications.
Your CNTs are likely to have poor solubility and begin to aggregate at the bottom of the water.
Sonication will begin the interaction between the surfactant and your CNTs.
The authors of the paper gave their CNTs 24 hours to interact with the surfactant. If your CNTs reaggregate, you may need to adjust the amount of surfactant or choose a different surfactant.
There are countless types of bioconjugate linkers that can be utilized with carbon nanotubes, too many to list here. You can learn more about bifunctional crosslinkers in our article. Instead, here some common examples:
Aldehyde functional groups on biomolecules can be bioconjugated to carbon nanotubes to produce new biomolecular nano molecules. The authors of this work produced a label-free electrochemical immunosensor based on cyclodextrin functionalized CNTs with ionic liquid containing ferrocene and aldehyde groups. Here’s an outline of the steps they took:
CNTs and cyclodextrin were stirred in ultrapure water for 12 hours resulting in the CD-CNT
This reaction occurred by mixing the two reagents (CD-CNT and CHO-ferrocene) in DCM for 6 hours. The product was collected via centrifugation.
The CNT in a homogenous solution was added to the surface of a gold electrode. The excess solution was washed away with water.
The antibody in solution was dropped onto the surface of the electrode and allowed to incubate for 60 minutes in air. Excess antibody was washed away with water. For alternative antibody conjugation methods, view our linked article.
Amines are commonly used in bioconjugation reactions and that is no different when producing carbon nanotube bioconjugates. The authors of this paper managed to successfully conjugate biomolecules including proteins and DNA to amino-functionalized MWCNTs. The protein they used was bovine serum albumin. The conjugate links were formed via amide formation. You can learn more about bioconjugation to nanoparticles like nanotubes here.
Here’s an outline of how they did it:
The authors outlined their method
The authors refluxed their carboxyl-CNT with ethylenediamine to create their amino-CNTs through amide formation.
DNA was added to the amino-CNTs and found to coordinate with the amino-CNTs via non-covalent interactions.
Cysteine is one of the essential amino acids and is found in most proteins. CNTs can be bioconjugated to cysteine for several reasons. The authors of this work managed to conjugate cysteine to CNTs during the development of an electrochemical sensor for Cd(II). The authors reacted carboxylic groups of an oxidized SWCNT with amino groups of S-triphenylmethyl cysteine using coupling chemistry. Here’s an outline of how they did it:
This was achieved by reflux for 3 hours followed by filtering and rinsing.
HBTU was added under an argon atmosphere and the mixture was stirred for 45 mins while cooled.
After adding dropwise, the reaction was allowed to continue over 48 hours under argon.
The product of the reaction was filtered with a 0.1 um pore size Teflon membrane and washed with DMF, ethanol, and acetone.
Related articles:
It is often difficult to selectively bioconjugate a specific protein functional group. This is no different for tyrosine residues on a protein, but these authors reported successful adsorption of tyrosine residues of silk sericin (a protein from the silkworm carcoon). The interactions between the CNTs and the tyrosine residues were non-covalent interactions. The authors noted the importance of this stable non-covalent bonding in the production of electrochemical sensors.
Most proteins and antibodies have readily available amines and carboxyls. You can label proteins and antibodies with these conjugation kits to save time and improve consistency between experiments.
Here’s how they did it:
The authors explore the process in the paper but also mention it can be purchased from some suppliers. However, they preferred their method because it had a higher purity.
The authors used MWCNTs for this experiment.
The authors estimated the power of their sonicator at 250 W.
The authors did this twice to ensure they removed all of the unbound MWCNTs. They were left with a sericin-MWCNT dissolved in solution.
There are many suppliers of carbon nanotubes for different purposes. Typically, you can buy carbon nanotubes with specific functionalization that you can go on to use for further purposes. Typically CNTs are functionalized with one group. You’ll need to utilize multiple orthogonal reactions and functional groups to attach different molecules to a CNT surface. Learn more about orthogonal reactions here.
Carbon nanotubes for bioconjugation can be bought from specialist suppliers such as Creative Diagnostics and Cheaptubes or major suppliers such as Sigma Aldrich.
| Kit and Supplier | How it works | Price |
| Creative Diagnostics Single, double, or multi-walled CNTs | CNTs can be purchased with a specific number of walls, diameter, and functionality for bioconjugation | Prices vary based on quantity and product. |
| Cheaptubes Functionalized CNTs | CNTs can be purchased with O+, COOH, NH2, N2, and F groups. Groups can be tailored to meet needs. | Prices vary based on quantity and product. |
| Sigma Aldrich CNTs | CNTs can be purchased as single, double, and multi-walled with a variety of functional groups and conductivity. | Prices vary based on quantity and product. |
We discuss how western blot negative controls improve western blotting technique and results, while providing…
We discuss best practices for determining sample loading quantities for western blots and give tips…
We discuss optimization of western blot exposure time and detection and provide protocols for detection…
We discuss bioconjugation linkers and their applications while providing tips and tricks to maximize bioconjugation…
We discuss applications involving nanobody bioconjugation and provide protocols, tips and tricks to maximize nanobody…
We discuss the structure of polymer brushes, protocols for bioconjugation of polymer brushes, and applications…